Equipment and Facilities
; win.focus();)
Title: Capsule running routine:
Introduction:1)First station:at this station,at the same time of vacuum separation system sending capsule into module hole,the body and the cap will be departed.
2)Second station:lower module descends and extends outward,staggering with upper module,for filling material.
3)Third station:this station is an extending and standly station,when a proper device is installed,grains and small pilulars can be filled.
4)Fourth station:filling mandril will push the prssed solid medicine column into capsule body.
5)Fifth station:prepared for the third station,(for filling grains and small pilulars)
6)Sixth station:it is to clean off and absorb the un-departed capsules by middle body of upper module and cap.
7)Seventh station:shut the upper module and lower module(close the capsules)
8)Eeight station:lower module will draw back ascending and cobine together with upper module,through the handspike operation,the filled capsule will be fixed together,so that the final product requirements will be reached.
9)Ninth station:it is to push out and collect the fixed final product capsule.
10)Tenth station:dust collector will clean the module hole and come into the next cycle.
Introduction:1)First station:at this station,at the same time of vacuum separation system sending capsule into module hole,the body and the cap will be departed.
2)Second station:lower module descends and extends outward,staggering with upper module,for filling material.
3)Third station:this station is an extending and standly station,when a proper device is installed,grains and small pilulars can be filled.
4)Fourth station:filling mandril will push the prssed solid medicine column into capsule body.
5)Fifth station:prepared for the third station,(for filling grains and small pilulars)
6)Sixth station:it is to clean off and absorb the un-departed capsules by middle body of upper module and cap.
7)Seventh station:shut the upper module and lower module(close the capsules)
8)Eeight station:lower module will draw back ascending and cobine together with upper module,through the handspike operation,the filled capsule will be fixed together,so that the final product requirements will be reached.
9)Ninth station:it is to push out and collect the fixed final product capsule.
10)Tenth station:dust collector will clean the module hole and come into the next cycle.
; win.focus();)
Title: DPP-250F Flat-Plate AI-Plastic (AL/AL) Blister Packing Machine
Introduction:The machine is designed improved and created by our technicians with the feedback
of customers who have using the machine for long time. It is widely used in the
AL-plastic (AL/Al)'s packing of each nubby object and liquid object of the vocation
such as medicine\food\electron\hardware etc. It can be used to proof moisture
and dust\improve product's level and additional value. It can be also linked
to product with pillow packing machine and boxing machine.
Introduction:The machine is designed improved and created by our technicians with the feedback
of customers who have using the machine for long time. It is widely used in the
AL-plastic (AL/Al)'s packing of each nubby object and liquid object of the vocation
such as medicine\food\electron\hardware etc. It can be used to proof moisture
and dust\improve product's level and additional value. It can be also linked
to product with pillow packing machine and boxing machine.
; win.focus();)
Title: Capsule's turn back process
Introduction:When the machine starts,the capsules in chute will come into the selection fork of distribution device vertically one by one;when the selection fork runs down ward,it will send a row of capsules into slot.Through the directional push of fiddle fork and the operation of selection fork,each capsule will be installed in module hole,pressing the cap with upper body lower
Introduction:When the machine starts,the capsules in chute will come into the selection fork of distribution device vertically one by one;when the selection fork runs down ward,it will send a row of capsules into slot.Through the directional push of fiddle fork and the operation of selection fork,each capsule will be installed in module hole,pressing the cap with upper body lower
; win.focus();)
Title: Transmission part
Introduction:Transmission part with high collocation, high precision
Introduction:Transmission part with high collocation, high precision
; win.focus();)
Title: Power Filling Process:
Introduction:1st station: punch medicine pole into 1/5 thickness of dosing disk.
2nd station: punch medicine pole into 2/5 thickness of dosing disk.
3rd station: punch medicine pole into 3/5 thickness of dosing disk.
4th station: punch medicine pole into 4/5 thickness of dosing disk.
5th station: punch medicine pole into 5/5 thickness of dosing disk.
6th station: push medicine pole with acceptable dosage into capsule.
Introduction:1st station: punch medicine pole into 1/5 thickness of dosing disk.
2nd station: punch medicine pole into 2/5 thickness of dosing disk.
3rd station: punch medicine pole into 3/5 thickness of dosing disk.
4th station: punch medicine pole into 4/5 thickness of dosing disk.
5th station: punch medicine pole into 5/5 thickness of dosing disk.
6th station: push medicine pole with acceptable dosage into capsule.
; win.focus();)
Title: NJP series of Capsule filling machines
Introduction:NJP Series Fully Automatic Capsule Filling Machine is filled by powder, grain and tablet. It adopts multi-bore dosing, intermittent motion and timing frequency conversion. It is suitable for automatically completing capsule feeding, separating, filling, waste capsule rejecting, closing, finished product ejecting for powder or small pilular. It has the new closed environment of turret, new latest design of device for opening/closing capsule, new closed environment of dosing device, use the beeline bearings from Japan, so that it can be sure a longer usage life. etc. (The difference between Model A, Model B and Model C: Model A is the general one, Model B with a high collocation on the important parts, adopts original Omron and Siemens on the host computer, motor, graduator, vacuum pump, linear bearing, transducer; lubricates the key parts without oil, so that prolong the usage life and improve the operation precise. Model C is improved on the Model B, adds touching controlled screen, PLC programable controller, intelligent module, explore; it has optional operation methods: manual operation and operation monitoring automatically. It will be stopped and alarmed automatically when lack for material, lack for capsule and material jam; it also can calculate the output timely and total output to keep a record)
Introduction:NJP Series Fully Automatic Capsule Filling Machine is filled by powder, grain and tablet. It adopts multi-bore dosing, intermittent motion and timing frequency conversion. It is suitable for automatically completing capsule feeding, separating, filling, waste capsule rejecting, closing, finished product ejecting for powder or small pilular. It has the new closed environment of turret, new latest design of device for opening/closing capsule, new closed environment of dosing device, use the beeline bearings from Japan, so that it can be sure a longer usage life. etc. (The difference between Model A, Model B and Model C: Model A is the general one, Model B with a high collocation on the important parts, adopts original Omron and Siemens on the host computer, motor, graduator, vacuum pump, linear bearing, transducer; lubricates the key parts without oil, so that prolong the usage life and improve the operation precise. Model C is improved on the Model B, adds touching controlled screen, PLC programable controller, intelligent module, explore; it has optional operation methods: manual operation and operation monitoring automatically. It will be stopped and alarmed automatically when lack for material, lack for capsule and material jam; it also can calculate the output timely and total output to keep a record)
; win.focus();)
Title: Electrical part
Introduction:Electrical part with high collocation, high precision.
Introduction:Electrical part with high collocation, high precision.
Didn't find what you're looking for? Post a buying lead.
Company Profile
Video Intro 
Certificates
Equipment and Facilities
Management
R&D
Quality Control
Agents Wanted
Company Info
Ruian Tianhong Pharmaceutical Machinery Co., Ltd.
[China]
[Verified Member]
City: Wenzhou
Province/State: Zhejiang
Country/Region : China
Business Type:Manufacturer, Other
Online Postings: Products